Chất phân tán HH2003F

• HH2003F Dispersant

This is a water-based dispersant for making highly concentrated slurries of inorganic powders.A small amount of addition can obtain a low-viscosity and high-concentration slurry with good storage stability. It has an excellent dispersing effect on satin white composite pigments with poor flow.

• Dữ liệu sản phẩm

Cấu tạo:

It is a polyoxyethylene-styrene polymer.

Tính chất tiêu biểu：

Bề ngoài: colorless to light yellow liquid

Nội dung rắn: 50%

P H value: 5

Mật độ: 1.1±0.05 g/cm3

Molecular weight: 70000

Ionicity: anionic

Solubility: easily soluble in water

Type: HH2003F

*.The values indicated in this data sheet describe typical properties and do not constitute specification limits.

• Ứng dụng

Đặc điểm nổi bật và lợi ích：

The dispersant can be used alone. If it is used with a non-ionic wetting agent, it can achieve the best performance. It does not contain formaldehyde, has high dispersion and grinding efficiency for inorganic pigments and fillers, good gloss, excellent water resistance, low foaming, and improves the viscosity of the coating.

• Khuyến nghị sử dụng

Used for dispersing inorganic powders not listed in the list, such as iron oxide series, aluminum oxide, cerium oxide, titanium dioxide, v.v.

• Số tiền bổ sung

According to the formula amount: 1%~5%

*. The above data are the dosage ratios in the formula. The optimal dosage needs to be determined through a series of tests.

• Hướng dẫn sử dụng

Để đạt được hiệu suất tốt nhất, the additives should be added to the grinding material first, and then the pigments. Premix the resin and solvent components of the grinding material, and then slowly add the additives under constant stirring. Do not add the pigment before the additives are mixed evenly.