Water-based dispersant HH2012

• HH–2012 Water-based dispersant
• Dữ liệu sản phẩm

Cấu tạo：

Aqueous solution of polyether-modified styrene maleic anhydride copolymer.

Tính chất tiêu biểu：

Bề ngoài: beige liquid

Density: 1.07 g/ml (20℃)

Nội dung hiệu quả: 40%

Dung môi: deionized water

Giá trị axit: 8mg KOH/g

Amine value: 15mg KOH/g

Viscosity: 4# cup · 25°> 130’

*.The values indicated in this data sheet describe typical properties and do not constitute specification limits.

• Ứng dụng

Special Features and Benefits：

Suitable for grinding with resin and pigment concentrate without resin. The color paste has high gloss, good moisture retention, obvious dispersion effect during grinding, low foaming, and high temperature resistance (no cooling water is required during grinding, up to 75 degrees).

• Khuyến nghị sử dụng

Wetting dispersant for water-based coatings and printing inks. For example: water-based nano-color paste, mực, industrial coating, wood coating, pesticide, leather coating and printing ink. Among them, alcohol in gravure printing ink has a very good effect.

• Số tiền bổ sung

The dosage of additives is based on the amount of powder:

Inorganic pigments: 5%-30%

Titanium dioxide: 4%-10%

Organic pigments: 25%~40%

Carbon black: 30%~60%

*. Dữ liệu trên là liều lượng thực nghiệm, và liều lượng tối ưu cần được xác định thông qua một loạt các thử nghiệm.

• Instructions for use

In order to obtain the best performance, the additives should be added to the grinding material first, and then the pigments. Premix the resin and solvent components of the grinding material, and then slowly add the additives under constant stirring. Do not add the pigment before the additives are mixed evenly.