Tel: +86-02082020897 Thư điện tử: hh@gdhhhx.com

Về Sự tiếp xúc |

wetting and dispersing agent HH2202 - Hóa chất Houhuan

Chất phân tán dầu/

wetting and dispersing agent HH2202

Cấu tạo: Double star star polymer.

 

Tính chất tiêu biểu:

Bề ngoài (25): colorless to light yellow liquid

Colour, platinum-cobalt: APHA≤50

PH value (1% aqueous solution): 5.0-7.0

Water content: ≤0.50%

Cloud point (10% BDG, ): 40-46

Nội dung hiệu quả: 100%

  • Thông tin chi tiết sản phẩm
  • Packing & instructions
  • HH2202 wetting and dispersing agent

HH2202 wetting and dispersing agent is a double star star polymer, similar to Degussa 440, without silicon, can effectively reduce static/dynamic surface tension in aqueous matrix, has outstanding wetting and dispersing (with resin) performance, and has good low foaming performance.

 

  • Dữ liệu sản phẩm

Cấu tạo:

Double star star polymer.

 

Tính chất tiêu biểu:

Bề ngoài (25): colorless to light yellow liquid

Colour, platinum-cobalt: APHA≤50

PH value (1% aqueous solution): 5.0-7.0

Water content: ≤0.50%

Cloud point (10% BDG, ): 40-46

Nội dung hiệu quả: 100%

*, the data given on this data page are only typical values, not technical indicators of the product.

 

  • Ứng dụng

Special Features and Benefits

  1. Rapidly wet the surface of silicon powder and silicon wafers, improve the lubrication stability of cutting fluid, thereby reducing line marks, TTV and dirty wafers, and improve the A-quality rate and output of silicon wafers.
  2. Rapidly wet the surface of diamond wire, reduce the powder accumulation phenomenon between diamond abrasives, maintain the surface roughness of diamond wire, and facilitate the stable cutting of crystalline silicon.
  3. Rapid wetting improves the cooling performance of cutting fluid to meet the trend of higher and higher line speeds and the gradual thinning of diamond wires.

 

  • Khuyến nghị sử dụng

As a low-foaming wetting agent dispersant used in conjunction with resin, it is widely used in solar crystalline silicon cutting fluid and other fields.

 

Số tiền bổ sung

Calculated based on supply form:

Pigment amount: 5%~8%

*. The above data is the dosage of the formula ratio, và liều lượng tối ưu cần được xác định thông qua một loạt các thử nghiệm.

 

Hướng dẫn thành lập và xử lý

To achieve the best performance, the additives should be added to the grind first, followed by the pigment. Premix the resin and solvent components of the grind, then slowly add the additives while stirring. Do not add the pigment until the additives are well mixed.

Tất cả các chất phân tán của chúng tôi được đóng gói trong thùng nhựa xuất khẩu. Các thông số kỹ thuật đóng gói thùng nhựa chính là: 25Kg, 125Kg, 200Kg, 1000Kg.

Thông số kỹ thuật bao bì chất phân tán

Thông số kỹ thuật bao bì chất phân tán

Chúng tôi cũng chấp nhận chất phân tán tùy chỉnh và các sản phẩm khác. Chào mừng bạn đến liên hệ với chúng tôi!

The information herein is based on our present knowledge and experience.The information merely describes the properties of our products but no guarantee of properties in the legal sense shall be implied. Chúng tôi khuyên bạn nên kiểm tra các sản phẩm của mình về sự phù hợp của chúng cho mục đích dự kiến của bạn trước khi sử dụng. Không bảo đảm dưới bất kỳ hình thức nào, rõ ràng hoặc ngụ ý, bao gồm bảo đảm về khả năng bán được hoặc tính phù hợp cho một mục đích cụ thể, được thực hiện liên quan đến bất kỳ sản phẩm nào được đề cập ở đây và dữ liệu hoặc thông tin được nêu, hoặc các sản phẩm đó, Dữ liệu hoặc thông tin có thể được sử dụng mà không vi phạm quyền sở hữu trí tuệ của bên thứ ba. Chúng tôi có quyền thực hiện bất kỳ thay đổi nào theo tiến bộ công nghệ hoặc sự phát triển hơn nữa.

Trước:

Để lại câu trả lời

Để lại lời nhắn