Powders Dispersants HH2101

• HH2101 Dispersants for inorganic powders

Data ng produkto

Komposisyon:

Ultra-high molecular weight inorganic powder dispersant containing carboxylic acid.

Karaniwang mga katangian:

Hitsura: white to light colored powder

Mabisang nilalaman: greater than 99%

Halaga ng pH: 4.0±1.0 (40% aqueous solution)

I -type: HH2101

*.Ang mga halagang ipinahiwatig sa sheet ng data na ito ay naglalarawan ng mga tipikal na katangian at hindi bumubuo ng mga limitasyon ng pagtutukoy.

Mga Aplikasyon

Mga espesyal na tampok at benepisyo:

1. It can produce high content and low viscosity inorganic powder wet grinding paste with a small amount of addition;
2. Significantly improve the grinding efficiency of liquid slurry mixture, so that the mixed slurry has excellent fluidity and low foaming performance;
3. Rapidly improve grinding efficiency;
4. Good adaptability and compatibility after blending with various inorganic powders;
5. Various types of inorganic powders can be added in advance to be used as a mixed dispersant for powder materials. There is no need to add a dispersant after the mixture is mixed with water. You only need to add 0.5% to 1% of MEA in the formula to disperse and grind.

• Inirerekumendang paggamit

It is suitable for dry powder premixing of titanium dioxide, kaolin, talc powder, iron oxide pigments, alumina, cerium oxide and other inorganic powders, graphite and other carbon materials.

• Addition 0amount

The recommended amount is the amount of inorganic powder: HH2101=100:3~5

*. This product can be used alone or in combination with other liquid types of nonionic and anionic polymers. Customers should conduct necessary step tests based on actual usage conditions to determine specific usage plans. When used in combination with other types of additives, tests must be conducted first to determine the dosage.

• Mga tagubilin para magamit

Upang makuha ang pinakamahusay na pagganap, Ang mga additives ay dapat na idagdag sa materyal na paggiling, At pagkatapos ay ang mga pigment (liquid first and then powder). Premix Ang Resin at Solvent Components ng Paggiling Materyal, at pagkatapos ay dahan -dahang idagdag ang mga additives sa ilalim ng patuloy na pagpapakilos. Do not add pigments before the additives are mixed evenly.