wetting and dispersing agent HH2202

• HH2202 wetting and dispersing agent

HH2202 wetting and dispersing agent is a double star star polymer, similar to Degussa 440, without silicon, can effectively reduce static/dynamic surface tension in aqueous matrix, has outstanding wetting and dispersing (with resin) performance, and has good low foaming performance.

• Data ng produkto

Komposisyon:

Double star star polymer.

Karaniwang mga katangian:

Hitsura (25℃): colorless to light yellow liquid

Colour, platinum-cobalt: APHA≤50

PH value (1% aqueous solution): 5.0-7.0

Water content: ≤0.50%

Cloud point (10% BDG, ℃): 40-46

Mabisang nilalaman: 100%

*, the data given on this data page are only typical values, not technical indicators of the product.

• Mga Aplikasyon

Mga espesyal na tampok at benepisyo

1. Rapidly wet the surface of silicon powder and silicon wafers, improve the lubrication stability of cutting fluid, thereby reducing line marks, TTV and dirty wafers, and improve the A-quality rate and output of silicon wafers.
2. Rapidly wet the surface of diamond wire, reduce the powder accumulation phenomenon between diamond abrasives, maintain the surface roughness of diamond wire, and facilitate the stable cutting of crystalline silicon.
3. Rapid wetting improves the cooling performance of cutting fluid to meet the trend of higher and higher line speeds and the gradual thinning of diamond wires.

• Inirerekumendang paggamit

As a low-foaming wetting agent dispersant used in conjunction with resin, it is widely used in solar crystalline silicon cutting fluid and other fields.

Halaga ng karagdagan

Calculated based on supply form:

Pigment amount: 5%~8%

*. The above data is the dosage of the formula ratio, and the optimal dosage needs to be determined through a series of tests.

Incorporation and Processing Instructions

To achieve the best performance, the additives should be added to the grind first, followed by the pigment. Premix the resin and solvent components of the grind, then slowly add the additives while stirring. Do not add the pigment until the additives are well mixed.