Oily dispersants HH60DY

• HH–60DY Solvent-based coating dispersant

• Product Data

Composition：

High molecular weight low polar polymer containing amino anchoring groups.

Typical Properties：

Appearance: Viscous amber transparent liquid

Effective content: 100%

Amine value: 20-25

Solvent: None

Density: ≈1.08

Type:60DY

*.The values indicated in this data sheet describe typical properties and do not constitute specification limits.

• Applications

Special Features and Benefits

1. In low polarity systems, it has a strong viscosity reduction effect;
2. The addition amount of inorganic powder is small, the viscosity reduction effect is obvious, the fluidity is changed, and the coating surface is uniform.
3. It has a very stable dispersing effect on organic pigments and has very good gloss. It has very good dispersion in low polarity systems, the coating surface has a very high density, and the printing ink effect is good.
4. Reduce the surface tension of the ink, improve the water resistance of the coating, and no VOC.

Note: This instruction manual is for reference only and does not have any guarantee properties. Please test its applicability in advance.

• Recommended Use

Oily UV, ship coatings, radiation-resistant coatings, lubricating oil grinding graphene, kerosene graphene, white oil stamp ink, white oil-based herbicide field, printing and dyeing coatings, iron printing inks and other low-polarity solvent systems, magnetic inks, oily thermal transfer inks, printer ribbon inks, ฯลฯ.

Compatibility: oily alkyd resins, acrylic resins, vinyl, white mineral oil, silicone oil, epoxy resins, phenolic resins and multifunctional resin systems.

Addition amount

Recommended Levels

The resin-containing grinding is 1-3% of the total formula;

*. The above data are empirical dosages, and the optimal dosage needs to be determined through a series of tests.

Instructions for use

To achieve the best performance, the additives should be added to the grind first, followed by the pigment. Premix the resin and solvent components of the grind, then slowly add the additives while stirring. Do not add the pigment until the additives are well mixed.