Solvent based dispersant HH2150

• HH-2150 Solvent-based dispersant

Wetting dispersant for solvent-based coating systems and resin-containing pigment concentrates with wide compatibility. Especially compatible with thermoplastic acrylic (TPA) and nitrocellulose systems.

• ข้อมูลผลิตภัณฑ์

ส่วนประกอบ

Block copolymer solution containing basic pigment affinity groups.

คุณสมบัติทั่วไป：

ลักษณะ: yellow transparent liquid

Amine value: about 50 mg KOH/g

Effective content: 50%

Density: about 1.01 g/cm³

กระสาย: PMA

ประเภท:HH2150

*.ค่าที่ระบุในเอกสารข้อมูลนี้อธิบายคุณสมบัติทั่วไปและไม่ถือเป็นขีดจํากัดข้อมูลจําเพาะ.

• โปรแกรม ประยุกต์

คุณสมบัติพิเศษและประโยชน์

1. The additive deflocculates the pigment through steric stabilization, and it also makes the pigment particles carry the same charge. The resulting repulsive effect and steric stabilization prevent the pigment from coarsening, thereby eliminating the problem of floating color in systems containing multiple pigments.
2. Due to the small particle size of the deflocculated pigment, high gloss can be obtained and color strength can be enhanced. นอกจากนี้, the transparency of transparent pigments and the hiding power of opaque pigments can also be improved. Due to the reduction in viscosity, the leveling performance is improved and the amount of pigment added can be increased.

Note: This instruction manual is for reference only and does not have any guarantee properties. Please test its applicability in advance.

• การใช้งานที่แนะนํา

Used for various types of concentrated color pastes containing resins, and can also be used for co-grinding of pigments in solvent-based coatings.

จํานวนเงินเพิ่มเติม

Inorganic pigments: 10%-15%

Organic pigments: 30%-60%

Titanium dioxide: 3%-5%

Carbon black: 60%-140%

*. The above data are empirical dosages(calculated according to the supply form), และปริมาณที่เหมาะสมจะต้องถูกกําหนดผ่านการทดสอบหลายชุด.

Incorporation and Processing Instructions

To achieve the best performance, the additives should be added to the grind first, followed by the pigment. Premix the resin and solvent components of the grind, then slowly add the additives while stirring. Do not add the pigment until the additives are well mixed.