အေးခဲခြင်းနှင့်လူစုခွဲခြင်း agent hh2202

• HH2202 wetting and dispersing agent

HH2202 wetting and dispersing agent is a double star star polymer, similar to Degussa 440, without silicon, can effectively reduce static/dynamic surface tension in aqueous matrix, has outstanding wetting and dispersing (with resin) performance, and has good low foaming performance.

• ကုန်ပစ္စည်းအချက်အလက်များ

ဖွဲ့စည်းခြင်း:

Double star star polymer.

ပုံမှန်ဂုဏ်သတ္တိများ:

ဖြစ်ပေါ်လာခြင်း (25℃): colorless to light yellow liquid

Colour, platinum-cobalt: APHA≤50

ph တန်ဖိုး (1% aqueous solution): 5.0-7.0

Water content: ≤0.50%

Cloud point (10% BDG, ℃): 40-46

Effective content: 100%

*, the data given on this data page are only typical values, not technical indicators of the product.

• လျှောက်လွှာများ

အထူးအင်္ဂါရပ်များနှင့်အကျိုးကျေးဇူးများ

1. Rapidly wet the surface of silicon powder and silicon wafers, improve the lubrication stability of cutting fluid, thereby reducing line marks, TTV and dirty wafers, and improve the A-quality rate and output of silicon wafers.
2. Rapidly wet the surface of diamond wire, reduce the powder accumulation phenomenon between diamond abrasives, maintain the surface roughness of diamond wire, and facilitate the stable cutting of crystalline silicon.
3. Rapid wetting improves the cooling performance of cutting fluid to meet the trend of higher and higher line speeds and the gradual thinning of diamond wires.

• အကြံပြုအသုံးပြုမှု

As a low-foaming wetting agent dispersant used in conjunction with resin, it is widely used in solar crystalline silicon cutting fluid and other fields.

ထို့အပြင်ပမာဏ

Calculated based on supply form:

Pigment amount: 5%~8%

*. The above data is the dosage of the formula ratio, နှင့်အကောင်းဆုံးသောက်သုံးသောစစ်ဆေးမှုများတစ်စီးရီးမှတဆင့်ဆုံးဖြတ်ရန်လိုအပ်ပါတယ်.

ထည့်သွင်းခြင်းနှင့်အပြောင်းအလဲနဲ့ညွှန်ကြားချက်များ

To achieve the best performance, the additives should be added to the grind first, followed by the pigment. ကြိတ်ဆုံ၏ resin နှင့်အရည်ပျော်ပစ္စည်းအစိတ်အပိုင်းများ premix, then slowly add the additives while stirring. Do not add the pigment until the additives are well mixed.