Solvent-based dispersant HH2611

• HH-2611 Solvent-based dispersant

HH2611 is a wetting and dispersing agent for solvent-based systems. It is suitable for wetting and dispersing solvent-based automotive coatings, industrial coatings, and pigment concentrates. It is particularly suitable for stabilizing very fine carbon black and organic pigments.

• ຂໍ້ມູນຜະລິດຕະພັນ

Composition

High molecular weight block copolymer solution containing pigment affinity groups.

Typical Properties：

Appearance: Light yellow liquid

Effective content: 100%

Density: Approximately 1.0 g/cm³

Soluble: Butyl acetate

*.The values indicated in this data sheet describe typical properties and do not constitute specification limits.

• Applications

Special Features and Benefits

1. Improves wetting properties, reducing grinding time and viscosity of abrasives.
2. Prevents floating color and blooming in multi-pigment systems.
3. Increases the gloss, color intensity, transparency, and hiding power of coatings.
4. Increases the storage stability of pigment systems.

• Recommended Use

Automotive coatings, industrial coatings, coil coatings, ປົງຄາຍ.

• Addition amount

Recommended addition amount (calculated based on supply):

Inorganic pigments: 10-15%

Organic pigments: 30-90%

Titanium dioxide: 3-6%

Carbon black: 60-120%

* The above recommended dosage is for reference only. The optimal dosage needs to be determined through a series of experiments.

Incorporation and Processing Instructions

First, premix the resin and solvent components, then slowly add the additives and mix thoroughly before adding the pigments. If the order is incorrect, it can be corrected by adding them later, but this must be done slowly under high shear stress.

Packaging Specifications & Storage & Shelf Life

• 1 x 25kg/plastic drum; 1 x 200kg/iron drum.
• Store at the recommended temperature of 10-40℃, avoiding direct sunlight. Separation or turbidity may occur when stored or transported at temperatures below 0℃. Heat to 25℃ and stir before use.
• The shelf life of the product, under suitable storage conditions and in its intact packaging, is 24 months from the date of production.

Safety Handling:

1. Avoid direct skin contact.
2. If accidental skin contact occurs, immediately wash with soap and water, then rinse thoroughly with clean water.