Aqueous dispersing HH2011X

It can improve the wetting and dispersing properties of solids or liquids in water, reduce the time required for the dispersion process, and make the materials stably dispersed in water. The amount of addition depends on the particle size and specific surface area of the organic phase. The amount of effective dispersant added is 20% to 50% of the specific surface area of the pigment after dispersion, when used to disperse the liquid organic phase.

The use of HH2011X dispersant and small molecule HH2000 (mass ratio of 1:1 to 3:1) can produce a suspension with small particle size, narrow distribution and good storage stability.

Product Data

Composition：

Carboxylic acid modified polymer solution.

Typical Properties：

Appearance: beige transparent liquid

Ionic type: anionic

Viscosity (mPa·s): 1500～2000 (25℃)

Effective content: 65%

PH: 7±1

Solvent: water, ethanol, butyl ether

Molecular weight: 19000

Acid value: 60

*.The values indicated in this data sheet describe typical properties and do not constitute specification limits.

Functional characteristics

HH®2011X dispersant is a poly(butyl acrylate-co-styrene-b-acrylic acid) block polymer, in which poly(butyl acrylate-co-styrene) is the hydrophobic segment and polyacrylic acid is the hydrophilic segment.

In water,similar to small molecule surfactants,dissolved hydrophobic-hydrophilic block polymers will self-assemble to form micelles. When the concentration of hydrophobic-hydrophilic block polymers is low,the polymer solution is transparent; when the concentration of hydrophobic-hydrophilic block polymers is high, the polymer solution is turbid. Due to the large molecular weight of the polymer,it takes longer to form micelles than small molecule surfactants.

Studies have shown that hydrophobic-hydrophilic dispersants that form micromicelles in water with weak binding forces are best for dispersing particles withHH-2011X low surface polarity such as carbon black and organic pigments. HH®2011X dispersant is adsorbed on the surface of the organic phase dispersed by mechanical force through the hydrophobic groups in the molecule,and the carboxylic acid ions in the molecule provide steric hindrance and electrostatic repulsion, so that the organic phase can be stably suspended in water.

Applications

It is used to produce water-based general color paste, water-based industrial paint,inkjet ink,pesticide suspension concentrate,PE wax suspension concentrate,ປົງຄາຍ.

Addition amount

Organic pigments: 20~30%

Iron oxide pigments: 5~10%

Carbon black: 20~30%

Titanium dioxide: 5%~7%

PE wax powder: 5~10%

*. The above data are empirical dosages, and the optimal dosage needs to bedetermined through a series of tests.

Incorporation and Processing Instructions

Mix HH2011X dispersant and water evenly,adjust the pH value of the aqueous solution to about 7±1,then add the material to be dispersed,disperse evenly and grind on a machine.

The information herein is based on our present knowledge and experience.The information merely describes the properties of our products but no guarantee of properties in the legal sense shall be implied. We recommend testing our products as to their suitability for your envisaged purpose prior to use. No warranties of any kind, either express or implied, including warranties of merchantability or fitness for a particular purpose, are made regarding any products mentioned herein and data or information set forth, or that such products, data or information may be used without infringing intellectual property rights of third parties. We reserve the right to make any changes according to technological progress or further developments.