Solvent based dispersant HH2150

• HH-2150 Solvent-based dispersant

Wetting dispersant for solvent-based coating systems and resin-containing pigment concentrates with wide compatibility. Especially compatible with thermoplastic acrylic (TPA) and nitrocellulose systems.

• ទិន្នន័យផលិតផល

ការតង្គនិគម

Block copolymer solution containing basic pigment affinity groups.

លក្ខណៈសម្បត្តិធម្មតា：

អាការរេកា: yellow transparent liquid

Amine value: about 50 mg KOH/g

Effective content: 50%

Density: about 1.01 g/cm³

ការដោះស្រាយផ្នែកខ្លះ: PMA

Type:HH2150

*.តម្លៃដែលបានបង្ហាញនៅក្នុងសន្លឹកទិន្នន័យនេះពិពណ៌នាអំពីលក្ខណៈសម្បត្តិធម្មតាហើយមិនបង្កើតដែនកំណត់ជាក់លាក់ទេ.

• កម្មវិធី

លក្ខណៈពិសេសនិងអត្ថប្រយោជន៍

1. The additive deflocculates the pigment through steric stabilization, and it also makes the pigment particles carry the same charge. The resulting repulsive effect and steric stabilization prevent the pigment from coarsening, thereby eliminating the problem of floating color in systems containing multiple pigments.
2. Due to the small particle size of the deflocculated pigment, high gloss can be obtained and color strength can be enhanced. លើសពីនេះទៀត, the transparency of transparent pigments and the hiding power of opaque pigments can also be improved. Due to the reduction in viscosity, the leveling performance is improved and the amount of pigment added can be increased.

Note: This instruction manual is for reference only and does not have any guarantee properties. Please test its applicability in advance.

• ការប្រើប្រាស់ដែលបានណែនាំ

Used for various types of concentrated color pastes containing resins, and can also be used for co-grinding of pigments in solvent-based coatings.

ចំនួន

Inorganic pigments: 10%-15%

Organic pigments: 30%-60%

Titanium dioxide: 3%-5%

Carbon black: 60%-140%

*. The above data are empirical dosages(calculated according to the supply form), and the optimal dosage needs to be determined through a series of tests.

ការបញ្ចូលនិងការដំណើរការសេចក្តីណែនាំ

ដើម្បីសម្រេចបាននូវដំណើរការល្អបំផុត, សារធាតុបន្ថែមគួរតែត្រូវបានបន្ថែមទៅកិនដំបូង, អមដោយសារធាតុពណ៌. សមាសធាតុជ័រនិងសារធាតុរំលាយនៃកិន, បន្ទាប់មកបន្ថែមសារធាតុបន្ថែមបន្តិចម្តង ៗ ខណៈពេលដែល stirring. កុំបន្ថែមសារធាតុពណ៌រហូតដល់ការបន្ថែមត្រូវបានលាយបញ្ចូលគ្នាយ៉ាងល្អ.