Electronic material dispersants DP60

• DP60 Electronic material dispersants

DP60 dispersant This product is an innovative polyester-amine block copolymer aqueous solution. It realizes the construction of a three-dimensional network structure through molecular design. It is specially developed to solve the agglomeration problem of carbon-based nanomaterials (graphene, carbon nanotubes, ល។) and lithium-ion battery materials (silicon-carbon anode, ternary cathode, ល។) during wet grinding and spray drying. Characterized by FTIR and GPC, its molecular weight distribution D50 = 2000-5000Da, containing 30% active amino groups (calculated in KOH).

• ទិន្នន័យផលិតផល

ការតង្គនិគម：

It is a polymer containing multiple functional groups.

The structure is as follows:

Polyester segment: Contains carboxylic acid/ester functional groups;

Amino segment: Contains quaternary ammonium salt modified groups

Core mechanism:

1. Multi-level dispersion system: The primary steric hindrance layer is formed by the flexible winding of polyester chains.
2. Stereo-anchoring effect: The amino functional group forms a coordination bond with the surface defect sites of the carbon material.
3. Solvent synergy: Forming a hydrogen bond network with NMP to improve mass transfer efficiency.

លក្ខណៈសម្បត្តិធម្មតា：

អាការរេកា: រាវថ្លាដែលមានពណ៌ស្រាល

viscositus: 120-180s (25℃, 4# ចានហន)

មាតិការឹងមាំ: ≥99.5%

Amine value: 28-32mg/g (KOH)

តម្លៃ pH: 8.5-9.5 (25℃)

Density: 1.15-1.25g/cm³ (25℃)

Water content: ≤0.1%

*, The values shown in this data describe typical properties and do not constitute specification limits.

• កម្មវិធី

Recommended application process:

1. Nano-scale wet grinding process

Process flow: raw material pre-dispersion → high-speed shear emulsification (12000rpm, 20min) → grinder (3000rpm, 4h, temperature control 50℃) → centrifugal impurity removal (12000g, 20min) → vacuum drying (60℃, -0.09MPa)

Recommended Levels：

①、Recommended dispersant addition: 20~50% (relative to carbon material)

②、Grinding media: zirconium oxide beads (Φ0.5mm, accounting for 80%)

*. The above data are empirical dosages, and the optimal dosage needs to be determined through a series of tests.

2. Spray drying process optimization

• Typical application cases

Case 1: Preparation of graphene quantum dot dispersion

Formula: 10g graphene quantum dots + 3g HHDF-60 + 80ml deionized water

Effect: DLS measured particle size 8nm (PDI<0.3), transmittance>92%@550nm

Case 2: Silicon-carbon composite negative electrode slurry

Process: 15kg Si-C particles + 1kg HH-DF60 + 60kg NMP

Performance: slurry viscosity 3000cP@60rpm, tap density 1.4g/cm³

• Safety and environmental protection data

• Technical advantages

1. Low temperature stability: can remain stable for more than half a year below 40°C (accelerated test verification)
2. Multi-material universality: also effective for wide bandgap materials such as LiFePO4 and TiO2
3. Process compatibility: seamless connection with existing lithium battery production lines, transformation cost <5%

• Packing specifications

1*25ខេក; 1*1000kg plastic barrel; packaging can be selected according to customer requirements.

• Storage & Transportation

Warning: This product is flammable, with a flash point of 90℃. Ventilation and explosion-proof are required during operation. Store in a cool and ventilated place, and avoid exposure to sunlight.

• Shelf life

The shelf life of unopened products is 18 months from the date of production.

The information herein is based on our present knowledge and experience.The information merely describes the properties of our products but no guarantee of properties in the legal sense shall be implied. យើងសូមផ្តល់អនុសាសន៍ឱ្យធ្វើតេស្តផលិតផលរបស់យើងអំពីភាពសមស្របរបស់ពួកគេសម្រាប់គោលបំណងនៃការយល់ឃើញរបស់អ្នកមុនពេលប្រើ. គ្មានការធានានៃប្រភេទណាមួយឡើយ, ទាំងបង្ហាញឬបង្កប់ន័យ, រួមទាំងការធានានៃការទទួលបានការចាប់អារម្មណ៍ឬសម្បទាសម្រាប់គោលបំណងជាក់លាក់ណាមួយ, ត្រូវបានធ្វើឡើងទាក់ទងនឹងផលិតផលណាមួយដែលបានលើកឡើងនៅទីនេះនិងទិន្នន័យឬព័ត៌មានដែលបានកំណត់, ឬផលិតផលបែបនេះ, ទិន្នន័យឬព័ត៌មានអាចត្រូវបានប្រើដោយគ្មានការរំលោភលើកម្មសិទ្ធិបញ្ញារបស់ភាគីទីបី. យើងរក្សាសិទ្ធិក្នុងការធ្វើការផ្លាស់ប្តូរណាមួយដែលយោងទៅតាមវឌ្ឍនភាពបច្ចេកវិទ្យាឬការអភិវឌ្ឍបន្ថែមទៀត.

The data in this manual are based on laboratory tests and typical working conditions. For actual application, please refer to the results of small tests. It is recommended to establish a material compatibility database and monitor the dispersion state in real time through surface contact angle (θ<30°) and Zeta potential (ζ>+30mV).