Electronic material dispersants DP60

• DP60 Electronic material dispersants

DP60 dispersant This product is an innovative polyester-amine block copolymer aqueous solution. It realizes the construction of a three-dimensional network structure through molecular design. It is specially developed to solve the agglomeration problem of carbon-based nanomaterials (graphene, carbon nanotubes, dll.) and lithium-ion battery materials (silicon-carbon anode, ternary cathode, dll.) during wet grinding and spray drying. Characterized by FTIR and GPC, its molecular weight distribution D50 = 2000-5000Da, containing 30% active amino groups (calculated in KOH).

• Data Produk

Komposisi：

It is a polymer containing multiple functional groups.

The structure is as follows:

Polyester segment: Contains carboxylic acid/ester functional groups;

Amino segment: Contains quaternary ammonium salt modified groups

Core mechanism:

1. Multi-level dispersion system: The primary steric hindrance layer is formed by the flexible winding of polyester chains.
2. Stereo-anchoring effect: The amino functional group forms a coordination bond with the surface defect sites of the carbon material.
3. Solvent synergy: Forming a hydrogen bond network with NMP to improve mass transfer efficiency.

Properti Khas：

Rupa: light-colored transparent liquid

Viskositas: 120-180s (25℃, 4# cup)

Solid content: ≥99.5%

Amine value: 28-32mg/g (KOH)

PH value: 8.5-9.5 (25℃)

Kepadatan: 1.15-1.25g/cm³ (25℃)

Water content: ≤0.1%

*, The values shown in this data describe typical properties and do not constitute specification limits.

• Aplikasi

Recommended application process:

1. Nano-scale wet grinding process

Process flow: raw material pre-dispersion → high-speed shear emulsification (12000rpm, 20min) → grinder (3000rpm, 4h, temperature control 50℃) → centrifugal impurity removal (12000g, 20min) → vacuum drying (60℃, -0.09MPa)

Recommended Levels：

①、Recommended dispersant addition: 20~50% (relative to carbon material)

②、Grinding media: zirconium oxide beads (Φ0.5mm, accounting for 80%)

*. Data di atas adalah dosis empiris, dan dosis optimal perlu ditentukan melalui serangkaian tes.

2. Spray drying process optimization

• Typical application cases

Case 1: Preparation of graphene quantum dot dispersion

Formula: 10g graphene quantum dots + 3g HHDF-60 + 80ml deionized water

Effect: DLS measured particle size 8nm (PDI<0.3), transmittance>92%@550nm

Case 2: Silicon-carbon composite negative electrode slurry

Process: 15kg Si-C particles + 1kg HH-DF60 + 60kg NMP

Performance: slurry viscosity 3000cP@60rpm, tap density 1.4g/cm³

• Safety and environmental protection data

• Technical advantages

1. Low temperature stability: can remain stable for more than half a year below 40°C (accelerated test verification)
2. Multi-material universality: also effective for wide bandgap materials such as LiFePO4 and TiO2
3. Process compatibility: seamless connection with existing lithium battery production lines, transformation cost <5%

• Packing specifications

1*25Kg; 1*1000kg plastic barrel; packaging can be selected according to customer requirements.

• Storage & Transportation

Warning: This product is flammable, with a flash point of 90℃. Ventilation and explosion-proof are required during operation. Store in a cool and ventilated place, and avoid exposure to sunlight.

• Shelf life

The shelf life of unopened products is 18 months from the date of production.

Informasi di sini didasarkan pada pengetahuan dan pengalaman kami saat ini. Informasi tersebut hanya menjelaskan sifat-sifat produk kami tetapi tidak ada jaminan properti dalam arti hukum yang tersirat. Kami merekomendasikan untuk menguji produk kami untuk kesesuaiannya dengan tujuan yang Anda bayangkan sebelum digunakan. Tidak ada jaminan dalam bentuk apa pun, baik tersurat maupun tersirat, termasuk jaminan kelayakan untuk diperdagangkan atau kesesuaian untuk tujuan tertentu, dibuat mengenai produk apa pun yang disebutkan di sini dan data atau informasi yang ditetapkan, atau bahwa produk tersebut, Data atau informasi dapat digunakan tanpa melanggar hak kekayaan intelektual pihak ketiga. Kami berhak untuk membuat perubahan apa pun sesuai dengan kemajuan teknologi atau perkembangan lebih lanjut.

The data in this manual are based on laboratory tests and typical working conditions. For actual application, please refer to the results of small tests. It is recommended to establish a material compatibility database and monitor the dispersion state in real time through surface contact angle (θ<30°) and Zeta potential (ζ>+30mV).